1 · Route on map

Tap the map to place points in the selected mode. Drag any marker to fine-tune. Or pick airfields from the lists below.

2 · Route & elevations

Departure airfield (Swiss list — every value can be overridden)

Departure elevation

ft AMSL

Cruise altitude

ft AMSL

Destination airfield

Destination elevation

ft AMSL

Target altitude at destination

ft AMSL

The altitude (AMSL) you want to reach over the destination — typically circuit / pattern altitude. Picking an airfield from the list pre-fills elevation + 1000 ft.

Intermediate waypoints (in route order)

No waypoints yet — switch the map to “Add waypoint” and tap along your route.

3 · Performance

Climb rate

ft/min

Climb TAS

Use a conservative average climb rate from your POH — rate of climb drops with altitude.

Cruise TAS

Descent TAS

Wind direction (from)

° T

Wind speed

Descent planning method

Descent rate

ft/min

Rule of thumb: a 3° path needs roughly GS × 5 ft/min and ≈3 NM per 1000 ft to lose.

4 · Altitude gates & profile

Top of Climb · TOC

—

enter a route to calculate

Top of Descent · TOD

—

enter a route to calculate

Gate / point	Dist (NM)	To go (NM)	TC (°)	GS (kt)	Gate alt (ft)	ETE	Phase
Set a departure and destination to see your gates.